Forum Replies Created

Viewing 15 posts - 211 through 225 (of 254 total)
1 2 3 … 14 15 16 17
  • Author
    Posts
  • September 3, 2014 at 8:04 pm #9922
    hortiman
    Participant

    Charlie.
    I have given a pile to Dave for weeley and still have some here.
    Chris

    September 2, 2014 at 8:13 pm #9902
    hortiman
    Participant

    Thanks to everyone who popped in to see us in the marquee. There certainly was a diverse range of machines this year without too many duplications, at last they seem to have the selection process sorted out.
    We could have sold club regalia, but sadly we were unable to get it down to the show this year, but don’t forget you can order it through the ‘Cultivator’ magazine.
    Yes the wet conditions were a problem for punters and exibitors getting around on the site, it could have been a lot worse! At least it washed the dust off our awning from last year.

    August 17, 2014 at 8:23 pm #9754
    hortiman
    Participant

    Several of our machines are able to run static equipment from PTO pulleys etc, dynamos, tarpenflex implements,saws, soil shredders etc, if they are well guarded and behind rope/fence I can see that it would be even more interesting than just a stationary machine and more interesting than a stationary engine with no equipment being driven.
    Chris

    August 14, 2014 at 7:42 pm #9724
    hortiman
    Participant

    Come and say hello in the Club marquee, there could even be a cup of tea and a chat for weary show goers.
    Chris

    August 8, 2014 at 8:45 pm #9605
    hortiman
    Participant

    Hi there.
    Are you sure it is a Drayton diesel? as they did fit a Sachs 500 to some late clifford mk 4 machines. I would have thought the Drayton was a bit big and heavy for a Clifford.
    A lot of Ransomes MG crawlers were fitted with Draytons, I am sure an MG crawler enthusiast will be able to help you.
    Chris

    August 6, 2014 at 8:29 pm #9578
    hortiman
    Participant

    Hi Andrew
    Try John Keedwell his name is down as organiser SVTEC, 01453 890891 or mandykeedwell@aol.com
    I hope this helps.
    Regards
    Chris

    August 6, 2014 at 8:20 pm #9577
    hortiman
    Participant

    Hi there.
    You should be able to obtain the necessary parts from Jon Cruse, The Mower centre, Hailsham, East Sussex. he has vast stocks of obsolete and hard to find parts for oldar machines. (01323 843447) daytime, or through his website.
    Chris

    July 8, 2014 at 8:36 pm #9094
    hortiman
    Participant

    I will have to start again.

    Attachments:
    July 8, 2014 at 8:28 pm #9092
    hortiman
    Participant

    I will try again !

    Attachments:
    July 8, 2014 at 8:06 pm #9091
    hortiman
    Participant

    Here are a couple of pics of the ‘Pic Pic’
    Chris

    June 25, 2014 at 8:36 pm #8786
    hortiman
    Participant

    You could try club member Tony Skingley I know he has one but not sure if he has stripped it down.
    Chris
    His details should be in the members directory

    June 25, 2014 at 8:34 pm #8785
    hortiman
    Participant

    Hi there
    Howard recommended KLG F50 or equivalent with a gap of .025″

    Hope this helps.
    Chris
    we always used L10s in ours for work, they seemed to do the job.

    June 22, 2014 at 8:39 pm #8739
    hortiman
    Participant

    Hi Chris
    They look in pretty good order, usually the tyres are totally bald, I guess they are three antelope units, should cover the ground quickly.

    June 13, 2014 at 9:20 pm #8622
    hortiman
    Participant

    Hi there
    I have found a carby it is on an old twin cylinder gem engine but looks servicable, probably need a good clean up and jet adjusting for the smaller BJ engine, I will get it off over the weekend and report back to you.
    Chris

    June 10, 2014 at 7:39 pm #8605
    hortiman
    Participant

    Hello Dave.
    I think I may have a spare one, I will look in the barn tomorrow.
    Chris

  • Author
    Posts
Viewing 15 posts - 211 through 225 (of 254 total)
1 2 3 … 14 15 16 17