[vhgmcbuddy]

Err its another ATCO John

As Andy says its not a MK40. My money on MK20 as I had one of these which I removed the engine & scrapped the rest!!

[vhgmcbuddy]

That is indeed a beast John, the spec plate should tell you what flavour of Villers you have, (if its got one) that would look grand with a Tarpen drive on it…

[vhgmcbuddy]

busy day ,started at 3.30 am. lots of tasks completed and have managed to make some more progress on this project. cyclinder needs another coat of paint,just in case you are thinking I have missed it.

Attachments:

1. 

[vhgmcbuddy]

Just a week to go now until the Christmas Lunch

To those of you who have not visited Millbrook Garden Centre before, as you walk in the entrance you will walk through the seating area and the cafe, to the right of the pay desk is a short flight of stairs which go up to “The Loft”, we will be up there and the VHGMC banner will be in the window.

Looking forward to seeing you all there, its not too late if you have not already booked your place please ring me on 01892 664786 ASAP so we have the numbers for the catering staff

Many Thanks
Paul

[vhgmcbuddy]

It had been stood up for 10 years before i got it 2 years ago
so the run it had was the first in 12 years ill give it another run
and see how it goes

[vhgmcbuddy]

If it’s not been used much it might be an idea to give it a few more runs to see if it improves, nice if it did. If not look up compression test diesel on You Tube.

[vhgmcbuddy]

Haha next chance i get will be wednesday takeing the kids
Out tomorow going beating monday sea fishing tuesday and
after wednesday ive got 1200 turkys to do for a mate

[vhgmcbuddy]

This 1032 has hydraulics fitted
https://www.ebay.de/itm/Gutbrod-1032-Traktor-Schlepper-Schmalspurschlepper-mit-viele-Zubehor-/161158047895?pt=Landtechnik_Traktoren&hash=item2585c4a897
It also has the frame under the centre of the tractor for mounting ploughs on to.

[vhgmcbuddy]

Cheers mate hope you and Francis are well im baffled as to where they went also had 2 planet Jr spanners 1 made in USA and the other England 🙁 I looked on that you know site to replace them but people are asking upto £20 each oh well I’ll just keep looking thanks

[vhgmcbuddy]

Did you get a good deal on your tyres? I could do with a new pair for one of my Allen’s.

Phil

[vhgmcbuddy]

steady on there ! you will have it finished by sunday night green thumbs up

[vhgmcbuddy]

I can see that BSK 3/16″R would be the thing – question is how to get the little blighter out!

[vhgmcbuddy]

Another i started today

Attachments:

1. 
2. 
3. 
4. 

[vhgmcbuddy]

It has DA1562F cast into the case beneath which is W?4885 – does that help?

[vhgmcbuddy]

Yes owen,green is the way to go on these little mowers. this paint which I use is very versatile because no matter what the weather,one way or another you can get it on whether you spray or brush. brushing is my preferred method as you can get more on in a shorter time span. managed to get this chaincase covered today. the shine is so intense you can see me in it taking the photo.

Attachments:

1. 

[Author]

Posts