Forum Replies Created
-
AuthorPosts
-
May 12, 2014 at 12:18 pm #8006
will-haggleParticipantI’ll put a note about MERL in the June edition of The Cultivator, thanks for the tip….
May 5, 2014 at 8:33 pm #7909
will-haggleParticipantThere is a wire in there, it’s a good idea to replace it as well. One member had a very frustrating time getting a spark until someone alerted him to the fact that it could be corroded as well – it was! It’s in the archive somewhere – I’ll have a look….
May 4, 2014 at 12:29 pm #7849
will-haggleParticipantI’m closer to Lincolnshire than Charlie by 30 miles! Better get your postman to Geography class!
May 2, 2014 at 4:51 pm #7801
will-haggleParticipantHi Sten, E is the year, 1942, according to my info… It was made for paraffin, the small tank is for starting petrol, they made a petrol/paraffin version for Landmaster, my list says it should be a type 5. Normally my type number list goes up to 15, so a type 26 doesn’t appear…
The full list of types for 16H are as follows:-
16H type 2 – Landmaster, L150
16H type 5 – Landmaster, L150 (TVO fuel)
16H type 7 – Various, JAP Standard, (less governor)
16H type 8 – Jackaroo Go-kart (Villiers Nameplate)
16H type 9 – Landmaster, L150 (Rope Pulley Start)
16H type 10 – Various, Go-karts (JAP Standard, less governor)
16H type 11 – Various, (JAP Standard, horizontal C/shaft)
16H type 14 – Landmaster, L150 (Rope Start and Landmaster’s Fram air filter)
16H type 15 – Landmaster, L150 (Recoil Start and Landmaster’s Fram air filter)All others were 16V, vertical crank for outboards….
May 2, 2014 at 2:12 pm #7791
will-haggleParticipantMy Autogardener has a throttle, but my Autoculto Junior hasn’t. I’v posted some pictures. 1st one is Russ Berry using his Autogardener, no throttle fitted, 2nd one is my Autogardener showing that the throttle pulls the governor rod, 3rd one is my Junior, with the carb removed, this shows the governor rod….
May 1, 2014 at 11:03 am #7767
will-haggleParticipantApril 29, 2014 at 8:21 pm #7743
will-haggleParticipantA very nice find, Kev, nice to get it back to it’s origin….
April 29, 2014 at 12:28 pm #7727
will-haggleParticipant…and mine….
All I need now is some more material for the June issue, thanks to Charlie and Benita for checking the April one for me…
April 29, 2014 at 9:03 am #7725
will-haggleParticipantThanks for the info, some of mine are quite nasty….
April 28, 2014 at 5:10 pm #7716
will-haggleParticipantTry a caravan or trailer shop for the rubber boots, Bonser might have used standard parts….
April 28, 2014 at 1:09 pm #7713
will-haggleParticipantApril 28, 2014 at 12:54 pm #7712
will-haggleParticipantAfter the (washed out) rally on Sunday, my wife asked me how many I’ve got. I need to do a stock take!
April 26, 2014 at 7:26 pm #7691
will-haggleParticipantNice to put a face to the name…
April 25, 2014 at 10:14 am #7667
will-haggleParticipantVery sorry, cultivator email is:-
cultivator-editor@outlook.comApril 25, 2014 at 7:38 am #7665
will-haggleParticipantThanks, Sam, I’m looking for items for the June issue, now…
-
AuthorPosts





