[vhgmcbuddy]

It looks like Mr. Doogan did a fine repair on the spark plug threads at a fair price.
Glenn

[vhgmcbuddy]

Yes sir, making one would be good. I hope you can find one locally if you decide not to make one. good luck. Glenn

[vhgmcbuddy]

Firstly Glenn many thanks for your help. I am in the UK, seeing I had difficulty finding this part used. I did look in to new prices, RCPW seemed to be a good price so I got a price for shipping $ 53. The part and shipping worked out £2 more than new in the UK. I tried the sites you mentioned but nothing used at this time. I will give it a bit more time to find a used one, Seeing this shaft is not all that complicated, it might be possible to get one made. I have the same part on my W H 512D, so if I could get that one off for a pattern. Might be a lot easier just to buy new. Will let you know. Thanks Again Owen.

[vhgmcbuddy]

I don’t know where you live, but the part is 41.35 USD = 38.4010 EUR If you don’t use EUR then this won’t help.

[vhgmcbuddy]

https://www.rcpw.com/parts-lookup?arisku=108565&arireturnurl=https%253A%252F%252Fwww.rcpw.com%252Flookup%252F%2523%252FToro_Consumer%252F01-14K801%25252c_C-145_8-Speed_Tractor%25252c_1980%252FLIFT_LINKAGE_%28CONT-D%29%252F01-14K801-21-1980%252F810169R1-69R10030-00014&aridescription=SHAFT-LIFT+LEVER&aribrandcode=TO Here is a link for the part you are looking for. I’m not sure if this link works for you. The part costs $41.35 USD. If you can figure in the shipping maybe it won’t cost too much.

[vhgmcbuddy]

Thanks for your reply Glenn, this is more a a tractor lift part, it’s the shaft that the lift lever fits on. I will look up your suggestions, The part is No 46 on the diagram. Thanks again Owen. One down side might be shipping from USA.

Attachments:

1. 

[vhgmcbuddy]

Hello owen, in regards to the lift part you are looking for, is there a right and left side, front or back? Is there a difference between the 42″ and the 48″ deck lift parts? I’m here in the states and if I can help you I would be glad to. Did you try pigironparts.com , wheelhorseforum.com Glenn

[vhgmcbuddy]

They are handy for weighing my parsnips, my neighbour was a farmer when he was alive, the family filled up 3 skips after his death with his lifetime of collecting, I was given a few of the better things !
I’m not sure if salter scales are still in existence, does anyone know what a large set of scales like this would have been used for ?
They have the magic ‘Made in England’ on them !

[vhgmcbuddy]

Believe it or not the original ones where made in Australia, but for whatever reason they disappeared after a few years. They are available on Ebay if you think £18.50 plus international shipping is expensive do not bother.

[vhgmcbuddy]

https://www.youtube.com/watch?v=h8yeo6x4B_w Here is a video of a Thackery Unicorn Log Splitter bit that fits into the shaft drive rotary power head. The power head has several parts that allows you to do ditching work, boe holes in the ground to plant trees/bushes, plough up the earth for gardens. I will be post pictures and videos of other attachments for my Gravely as time goes by. I hope folks like what they see and comment about them. Glenn

[vhgmcbuddy]

That looks to be a very useful machine, where I am we get very little snow worth talking about.
I saw your other post listing your machines and attachments, you have quite a collection. If you have any photos of your machines with the different attachments you could post some, it’s always nice to see something different.
Rob

[vhgmcbuddy]

Is it muddy around the auction Geoff I’ll bet it is,makes it hard work but walking around but we still do it in pursuit of a bargain.

[vhgmcbuddy]

hope to be their bright and breezy saturday morning with forms for lottmead show and a trailer for the auction….

[vhgmcbuddy]

I wish they were mine, very nice condition

[vhgmcbuddy]

Here is my snow blower in action. https://www.youtube.com/watch?v=jX14jLoHjmI

[Author]

Posts