Forum Replies Created

Viewing 15 posts - 241 through 255 (of 274 total)
  • Author
    Posts
  • #10941
    dave
    Participant

    Nice conversion, Can I please have the machine no’s for the Ransomes register.
    Ta Dave Clark.

    #10737
    dave
    Participant

    Try ultrasonic cleaning the carb, I have found that this often works.
    If not a small squirt of petrol straight down the throat of the carb
    may help and fresh petrol is a must.
    Please send details of the machine no to me for the Ransomes
    register that I am setting up.
    Dave Clark.

    #10719
    dave
    Participant

    Hi Rob
    Many thanks for the serial no of your MG40 It has been added to my list
    and will be on the next update.
    Dave.

    #10692
    dave
    Participant

    Correction to the last statement. It should read, I will get granddad to look
    in his shed for some aluminium.

    #10637
    dave
    Participant

    A big thank you to Geoff, Ivan and Steve for all the effort
    and work in putting on a great display and for the pork pie
    and other treats. The gang from Essex were made welcome and
    it was a very warm welcome even if the heaters had been
    turned off. Hope to see you all in March. Dave Clark.

    #10602
    dave
    Participant

    If you live in the Essex area please give me a phonecall
    on 01376 340072. I might be able to help you with
    some engine spares. Dave Clark.

    #10526
    dave
    Participant

    See you all there on Sunday. Dave.

    #10500
    dave
    Participant

    For Shackleton read a squadron of loose rivets flying in formation.
    I am glad that you had a good day.

    #10434
    dave
    Participant

    Hi wandr, if you live near me, Braintree, I have a couple of scrappers
    down the yard you are more than welcome to come over and help yourself
    to the tank straps.
    regards Dave.

    #10412
    dave
    Participant

    Hi Wandr, Come to Weeley next September with or without a machine and we will
    help you all we can with a loan of a machine or help with your own machine.
    There will be several acres of land to play on and lots of (expert) advice
    and help at hand.
    Dave.

    #10228
    dave
    Participant

    Have you considered ultrasonic cleaning of the carb? I purchased
    an ultrasonic cleaner from Machine Mart last year and I have
    cleaned the carbs on my Ransomes and Roberts Trusty in it and
    both machines seem to be behaving a lot better since a good
    vibratory clean.

    #10194
    dave
    Participant

    Andrew, Most of the Ransomes Paperwork is held at the Ipswich transport museum
    or the M.E.R.L. good luck. Dave.

    #10187
    dave
    Participant

    Try page 30 in Brian Bell’s book Seventy Years of Garden Machinery.

    #10181
    dave
    Participant

    Now that the weekend is over and all the machines are off the field has
    anybody got any complaints or comments to make? Next years event
    takes place on 19th and 20th September. We have one or two ideas that
    we are talking about but we really want your input on this as it is
    your club and David and myself want it to be as good as this year
    or better. So come on lets hear from you. Dave .

    #10158
    dave
    Participant

    Thanks to everybody who came to Weeley and helped to make it
    such a good weekend. I am putting a piece together for the
    Cultivator so I wont go here but it was worth all the effort.

Viewing 15 posts - 241 through 255 (of 274 total)