Forum Replies Created

Viewing 15 posts - 31 through 45 (of 266 total)
1 2 3 4 … 16 17 18
  • Author
    Posts
  • January 24, 2022 at 1:26 pm #38504
    dave
    Participant

    I checked my Teagle Jetcut this morning. No numbers on the belt
    but it measured 27 inches round the outer of the belt. I hope that
    this is of use to you.

    October 22, 2021 at 10:46 am #38104
    dave
    Participant

    Postman Pat has just delivered my copy of the Cultivator

    September 27, 2021 at 8:48 am #37936
    dave
    Participant

    Quick answer. YES.

    April 16, 2021 at 9:36 am #36950
    dave
    Participant

    Got my copy yesterday. Well done Alan.
    Another interesting read.

    February 24, 2021 at 12:01 pm #36704
    dave
    Participant

    At a guess the old wooden handle rotted out and a enterprising
    gardener hammered a metal spike in so he could carry on rolling
    the lawn.

    February 14, 2021 at 9:42 am #36629
    dave
    Participant

    Mine arrived Saturday. Another good read. Very well done Alan.

    December 18, 2020 at 12:07 pm #36196
    dave
    Participant

    Postman Pat delivered my copy this morning. Yet another very good read.
    Thanks Alan for all the good work and effort.
    Happy Christmas.
    Stay virus free.
    Dave.

    November 26, 2020 at 12:03 pm #35994
    dave
    Participant

    Scott.
    Try phoning the Hayter factory.
    01279 723444.

    October 4, 2020 at 1:37 pm #35473
    dave
    Participant

    I have a Clifford Cultivator fitted with a J A P 600cc side valve engine
    and the J A P handbook states a Zenith 24T-2 no 1467 carburetter.
    So maybe you could fit a Zenith instead of the Amal.
    I can scan and send you the details if required.

    August 30, 2020 at 11:27 am #35331
    dave
    Participant

    We think that it worked off a pressurised system so the flow
    of water kept the pump working. Probably in a overhead system
    in large glasshouses or market gardens.

    August 27, 2020 at 8:41 am #35306
    dave
    Participant

    Hi, Your Ransomes MG5 dates from 1949. I do have a parts list for a MG5 and an engine
    instruction book. I can get my grandson to download and send to you. Please
    contact me at djclark89@btinternet.com and I will try and help you.
    Dave Clark.

    August 23, 2020 at 1:58 pm #35287
    dave
    Participant

    There are two service sheets on the member downloads which may be of help.
    If this does not help please phone me as I think I know where there is a
    ramdozer that I might be able to go and photograph for you. Also can I have
    your tractor and engine numbers for the Ransomes register.
    Many thanks. Dave.

    August 21, 2020 at 1:39 pm #35258
    dave
    Participant

    Peter. Many thanks for the Ransomes MG2 details. I will add them to the Ransomes register. Your machine was made in 1938. If you need help I do have a MG2 handbook that I can download and send on to you. Your machine looks in very good order, congratulations, keep up the good work.
    Dave.

    July 13, 2020 at 9:38 am #35007
    dave
    Participant

    New potatoes, Chicken and veg from the garden and rhubarb and custard for afters. I think that
    we all may have to come round for Christmas dinner. What time is it going on the table?

    June 25, 2020 at 8:01 am #34858
    dave
    Participant

    Yes. I went over to Rugby on Tuesday and collected it.

  • Author
    Posts
Viewing 15 posts - 31 through 45 (of 266 total)
1 2 3 4 … 16 17 18