Forum Replies Created

Viewing 15 posts - 46 through 60 (of 274 total)
1 2 3 4 5 … 17 18 19
  • Author
    Posts
  • November 26, 2020 at 12:03 pm #35994
    dave
    Participant

    Scott.
    Try phoning the Hayter factory.
    01279 723444.

    October 4, 2020 at 1:37 pm #35473
    dave
    Participant

    I have a Clifford Cultivator fitted with a J A P 600cc side valve engine
    and the J A P handbook states a Zenith 24T-2 no 1467 carburetter.
    So maybe you could fit a Zenith instead of the Amal.
    I can scan and send you the details if required.

    August 30, 2020 at 11:27 am #35331
    dave
    Participant

    We think that it worked off a pressurised system so the flow
    of water kept the pump working. Probably in a overhead system
    in large glasshouses or market gardens.

    August 27, 2020 at 8:41 am #35306
    dave
    Participant

    Hi, Your Ransomes MG5 dates from 1949. I do have a parts list for a MG5 and an engine
    instruction book. I can get my grandson to download and send to you. Please
    contact me at djclark89@btinternet.com and I will try and help you.
    Dave Clark.

    August 23, 2020 at 1:58 pm #35287
    dave
    Participant

    There are two service sheets on the member downloads which may be of help.
    If this does not help please phone me as I think I know where there is a
    ramdozer that I might be able to go and photograph for you. Also can I have
    your tractor and engine numbers for the Ransomes register.
    Many thanks. Dave.

    August 21, 2020 at 1:39 pm #35258
    dave
    Participant

    Peter. Many thanks for the Ransomes MG2 details. I will add them to the Ransomes register. Your machine was made in 1938. If you need help I do have a MG2 handbook that I can download and send on to you. Your machine looks in very good order, congratulations, keep up the good work.
    Dave.

    July 13, 2020 at 9:38 am #35007
    dave
    Participant

    New potatoes, Chicken and veg from the garden and rhubarb and custard for afters. I think that
    we all may have to come round for Christmas dinner. What time is it going on the table?

    June 25, 2020 at 8:01 am #34858
    dave
    Participant

    Yes. I went over to Rugby on Tuesday and collected it.

    June 24, 2020 at 9:02 am #34848
    dave
    Participant

    As a belated postscript to this. I now have a Fairlawn spreader
    and all the paperwork. As soon as we can clean up the paperwork we will make
    it available. Stave a copy will be on its way to you.

    May 22, 2020 at 5:48 pm #34439
    dave
    Participant

    A friend of mine sent me a few new spuds from his garden today. Maybe
    Geoff wants new spuds for Christmas dinner.

    February 15, 2020 at 9:05 am #33285
    dave
    Participant

    got mine Friday thanks.

    December 25, 2019 at 10:43 am #32980
    dave
    Participant

    Ho Ho Ho Happy Christmas to all fellow club members.
    See you all at Weeley 19th 20th September 2020.
    Dave.

    October 26, 2019 at 8:19 am #32313
    dave
    Participant

    Louis
    The Carburettor you require is a Amal concentric no 244/873.
    The fuel pump is an Amal type 150/858.
    As Neil comments they are very rare items.
    Can you please send me the tractor and engine numbers for
    the Ransomes register.
    Dave.

    October 25, 2019 at 1:32 pm #32287
    dave
    Participant

    Postman Pat has just delivered my copy.

    October 14, 2019 at 10:04 am #32249
    dave
    Participant

    A friend of mine had the same problem. He managed to cut a bit of digger bucket
    lip plate to size and carefully trimmed the old worn share to shape and mig
    welded the lip plate into place. Not a 100% job but it got him ploughing again.
    Can you please send me the frame and engine numbers for the Ransomes register.

  • Author
    Posts
Viewing 15 posts - 46 through 60 (of 274 total)
1 2 3 4 5 … 17 18 19