[vhgmcbuddy]

Hi Charlie, I haven’t got mine yet Charlie but I did have problem with my last copy I had to shout out, I think it’s because they don’t know where Lancashire is, or how to spell it.

Phil

[vhgmcbuddy]

Thanks for the kind comments.Didnt realise how different my model trusty is to the others,really boxy.The main drive also seems to stick out a lot further.Still does a good job when i cant get in with my Gem. After recently using both the Trusty and Gem at work the landscape contractors i was working along side all commented how much better they were than there modern tillers.

[vhgmcbuddy]

Yes unfortunately the engine is all that’s left .

[vhgmcbuddy]

Cheers Charlie.
Whacking will commence in the morning.

[vhgmcbuddy]

The engine is not standard. It is fitted with a B/S ,not exactly sure of the horse power as their are no codes stamped on the cowl,so it must have been replaced at some time.When i bought the Trusty it was fitted with the remains of what may have been a JAP 6 .It was so nose heavy the previous owner had fitted a tool box made of boiler plate on to the handlebars.

[vhgmcbuddy]

so if we missed the mailing list will we still get it?

[vhgmcbuddy]

Thanks for the advice everyone.
As above, I’m still not convinced I’ve correctly identified the engine type. Is the 25C a four stroke? Mines a 2.
Can anyone tell from the original pic I posted?

Cheers,
Jim

[vhgmcbuddy]

Well, that’s progress; sometimes with this old kit “needs must” has to take presidence over “good practice”!
As Charlie says, Villiers coils are a known issue but in fairness, if it is original, it is probably over 50 years old !
Go for a new or rewound coil and not a “new old stock” one that may have hidden internal corrosion. As well as Meetens, Villiers Services and Villiers Parts are both good sources but when comparing prices be aware that some include vat and some don’t. For the sake of another £10/12 a new condenser could save a lot of hassle.

[vhgmcbuddy]

Hi Charlie.
Thanks for that. Once the central bolt goes tight again, do I just keep turning it?
How much is a complete set of coils, points and condensor going to set me back?

Also, isn’t the 25C a fours stroke motor?? Mine is a 2 stroke so I still need to confirm the motor type. I cannot see any identification numbers on it.

Jim

[vhgmcbuddy]

Engine sounds sweet but as these engines are “forced air cooled” you need to refit the tin engine cowling back on as it directs air from the flywheel fan over the cylinder and head to keep it cool !!.

[vhgmcbuddy]

Hi Angus.
Well I have managed to remove the flywheel bolt. Had to hammer a socket onto the rounded off head and use an air impact gun in the end. As you suggest, I will now weld a nut onto the head of the old one. I’ll probably turn the old head down first.
The points were actually rusted together. They now move OK and I’ve filed new faces, but not sure I’m getting a spark yet. There’s currently no cylinder/piston on the motor, with the con-rod flopping about from the crank. I will have to wait to get the new rings before reassembling the top half and running the crank at speed.
What else could be wrong with the ignition system that is replaceable?
Cheers both,
Jim

[vhgmcbuddy]

I’ve found another reference that says A26 for machines with a Villiers four-stroke. Can anyone confirm this?

[vhgmcbuddy]

What are the 4 nuts around the circumference of the vaned flywheel for?

If I’m on the same track, they are the ones that hold the ring of cooling fins to the flywheel. Those fins are not very strong so don’t be tempted to try and lock the flywheel using them!!
Before attacking that centre bolt with a grinder just make sure that you can lay your hands on a suitable replacement. Might be better to get a nut welded to it.

[vhgmcbuddy]

Hi Charlie and thanks for the reply.
I will try again with the central bolt. Its done up tight, and almost completely rounded off. Might have to get a grinder on it 🙁
What are the 4 nuts around the circumference of the vaned flywheel for?
I will contact Meetens on Tuesday.
Cheers

[vhgmcbuddy]

I havent got a copy 🙁

[Author]

Posts