[vhgmcbuddy]

thats what i’am trying for paul.

[vhgmcbuddy]

the sun was out today so painted the wheels and seat

Attachments:

1. 
2. 

[vhgmcbuddy]

Getting excited now, will the shiny red horse make it to Newark ???

Watch this space !!

[vhgmcbuddy]

Any more photos Mr Showman ???

[vhgmcbuddy]

Nice to see the A type Where did you get that paint from ? It is not lister green Dulux used to make it Seriously. I used to check each batch for the correct composition, solids thinners etc Listers were very fussy

[vhgmcbuddy]

thanks ian

[vhgmcbuddy]

Didn’t the very late ones come with kohler s factory fitted?

[vhgmcbuddy]

sorry i did not say which its a plowmate in very good order will try 2 get pics at weekend thanks garfield

[vhgmcbuddy]

no problems ray about the second carb diagram,and many thanks for the other pdf s .it was not as straight forward as some engines to ID BUT WE GOT IT WITH GOOD STERLING EFFORTS BY ALL CONCERNED.

[vhgmcbuddy]

I found this advert on the internet.

Attachments:

1. 

[vhgmcbuddy]

thanks for asking. ord and maddisson where large quarry owners from county durham.they specialised in quarry products for many years,but also in darlington co durham had a steel fabrication shop and made items large and small in cast iorn. darlington had a large repair works for trains,and I think that wagon works and repairs on all rolling stock helped ord and maddisson keep there foundry going as well as farm machinery. now the only other product which went through this crusher was cotton seed cake which was high in protein,this is where I have got part of the name from in the project title. thanks for your enquirey. john .

[vhgmcbuddy]

Steve Woollas is your man for these machines Kev

[vhgmcbuddy]

At least if people notice your bald patch Ian it stops them taking the mick about mine !!

[vhgmcbuddy]

Getting on with panels, I find Hammerite stonechip shield spray can works well for inside panels, under foot rest and under rear fender. It can be over painted with most paints although I don’t bother. When I took the panels off underneath was in good order so not to much work needed.

Attachments:

1. 
2. 

[vhgmcbuddy]

Seeing the post from Rob Patton, does anyone have photos of a finger bar mower fitted to an MG?

[Author]

Posts