[vhgmcbuddy]

Out again

Attachments:

1. 

[vhgmcbuddy]

Out and about

Attachments:

1. 

[vhgmcbuddy]

Charlie,making a good job dispite shelling out for the new items which it needed. the finished restoration will have been expensive ,but worth it.

[vhgmcbuddy]

As always I do everything back to front, I made a nice set of gaskets before I asked .
I will try and update forum during assembly .

[vhgmcbuddy]

Hi Charlie,
I’ve been waying up the rebuild and on looking at the parts list can not find a gasket between the gear cases and I must admit when I took it apart did not find a lot of material . Did they just use sealer ? I have made a new gasket but are scratching my head now.

Any thoughts

[vhgmcbuddy]

PM sent Angus!

[vhgmcbuddy]

Good news then Kev, come on folks if you want a frinedly event in the Garden of England then contact Kevin wothout delay for a form !!

[vhgmcbuddy]

hi the splitter could be easy,as I saw a log splitting head mounted onto a car rear axel and that was the power drive to make it rotate and split the logs. Maybe one fitted to an atom wheel jacked up clear of ground would do the same thing.

[vhgmcbuddy]

hi paul, so far we have 37 entries confirmed and more to follow, so looking good. if anyone else out there would like an entry form just let me know

[vhgmcbuddy]

The bonsor was missing the optional extra front bumper. Made a replacement this afternoon. Waiting on filters and need to fit the exhaust that has arrived today.

[vhgmcbuddy]

Ref the splitter – I am going to set up a belt driven screw type table arrangement. There are loads of examples on YouTube driven by washing machine motors so how hard can it be…?

[vhgmcbuddy]

Thanks guys – no rush on the photos it will be an autumn project. The summer is dedicated to make ing a log splitter to run off the atom
C

[vhgmcbuddy]

Had a look at the link Sten, that looks to be the one.

[vhgmcbuddy]

Link didn’t work
https://www.tractorbox.co.uk/forum/forum_posts.asp?TID=7604&PD=0

[vhgmcbuddy]

After a bit of research I think it is a Landmaster, very similar to a L160 but not the same, the wheels and bottom half of the chaincase are the same. see this link to the old website

[Author]

Posts