[hdtrust]

Guaranteed after shot blasting you will find more holes, its time to fabricate a new tank, as cost over time filling holes it will be a lot cheaper!

[hdtrust]

Hi Andy, the term original is what it says, there is no term about it, its like scoring a goal, if it goes in the net then its a goal, if you miss it is not a goal.
When we restore machines, its back to how they were in a new state, as for parts if they are missing then we make them, we are always in the foundry picking up new castings. This is the problem with a lot of modern collectors, its ok purchasing a machine that is 50 years plus old but dont expect the parts to be sat on a dealers shelf waiting to be fitted!
Then there is the modern couch collector who thinks restoration is coating bare metal and flaky paint, with an oily rag, saying they are preserving for the future, there will be no future if the parts are warn. Or is it the case they are scared to strip it, but dont want to show their inadequateness in life!

[hdtrust]

It is your machine, it up to you, but normally it is to restore to the quality and looks when it was new, which is original condition,unfortunetly the saying original condition has been corrupted by a faction of vintage collectors to mean red rust covered in oil! To be left to the next generation to do the correct thing. When in fact all they are displaying is their ignorance to those in our movement to strive to save our history correctly

[hdtrust]

Flymo’s were sold under various names, the one you have in the picture is a Flymo Contractor 52, 52 coming from the cutting width of the blade.
The engine should be an Aspera 122cc long life heavy duty, air cooled, third-port induction, loop scavenged two-stroke.
The one you are showing dates from the earliest 1975 – 1981
The engine speed is fixed at 3,300rpm, the carb has a diaphragm with a fixed jet and primer, don’t go pocking any wire into those jets, as you will ruin the engine!
They were sold by the lorry load to Councils for use on banks, I can remember quite clearly the wheels were great for travelling site to site, but that frame always got in the way on steep banks, times many we attached ropes to them, sending them down steep banks then pulling them back up on the rope and at the end of the day having arms the length of Orangutans!

[hdtrust]

The original question was about the machine in the back ground, which I answered, I admit I did go on to try and identify the characters in the photo and earlier this year I did speak to Tony the originator of this question, my question to you Simonp are you a family member or the author of the book about the odd daughter of the Berners?
As for the steam mower I have a better picture of it in steam, and surprisingly enough, the machine still exists to this day, but alas I’m not going to divulge its whereabouts here!

[hdtrust]

By the time you have added travelling time to the post office, and packing materials S T Bishop is a very good price for you, and also they have a very good track record, S T Bishops Son now runs the buisness but they still have a lot of dead stock hanging around, so probalby will be able to supply your bottom blade

[hdtrust]

Yes the roller requires stripping from the housing, so that you can get to the axle, there will be 2 main reasons for the roller not to spin, the first may well be to do with corrosion for not being used for years. Put the rollers vertical in a vice, then get diesel in a spray can and soak all around the axle and leave, if it still does not move you can always add a bit of heat.
The second problem could be that the roller has slipped on one of its journals, in this case caution must be observed as any use of ‘whitworth hammers’ could be a costly mistake. Again use diesel to free the roller parts, check whether the slide pin has moved position on the axle, if it has, then a new pin needs to be made. This is not uncommon on warn machines

[hdtrust]

Yes the Stoic, I can remember from my apprentice days, made a good job on normal lengths of grass, but never try using one on thick grass in whip areas, or it will spend more time in the workshop than on the grass! To stop the engine having serious damage, there was a small aluminium slide pin that would shear on the flywheel, which would have to be swapped, a right pain, I can tell you, We even had a time for it, in our bonus books on the Council (somebody mention bonus!)

[hdtrust]

Yes the roofs of the marquees are hung up to dry for a few days before we can pack them away for the next show, good job we have very large barns where we store our show equipment

[hdtrust]

A nice example, I would say late 1930’s, these were sold by The Army and Navy Stores from their catalogues via their Victoria branch London

[hdtrust]

A very interesting photo. Yes the mower in the back ground is a Leyland Steam Mower of 30 inch cut.
I know this photo well. The date of the photo is 1894 and it was taken at the first season at Woolerstone Cricket Club at their match against Colchester Garrison. In 1894 Woolerstone Hall was the seat of Charles Hugh Berners, High Steward of Harwich, Essex.
Charles Hugh Berners is the gentleman in the photo second from the left. His Son John A Berners is on the right in cricket flannels. In 1899 the England team played the Woolverstone team, at the Hall. In 1904 J.A. Berners played for Middlesex.
In 1937 Woolerstone Hall was sold. Was purchased by Lord Nuffield as an investment for Oxford University, in WW2 it was taken over and known as HMS Woolerstone, in the 1950’s it became a school and today its a large wedding venue!

[hdtrust]

Hi, Yes there was talk at Ransomes pre war over the Minor but as a lot of things did not leave the drawing board to much later, Your mark V1 overlaps the period. The true Minor which is styled differently started production in January 1951 and ended production in November 1955, This was classified as a mark 6.
You have to remember the war was 1939 to 1945, but the displacement of men and materials and rationing went on a lot longer, I’m afraid people forget with time, all the nasties in life!

[hdtrust]

Hi, just got back from a hunting trip in the West Country!

The ident on your plate is not straight forward. The Mark 4, 14 inch Ransomes mower started manufacture in March 1938 and ended in August 1951, but production stopped during world war 2.Your machine T9714 dates to August 1949. Spare parts for your machine became obsolete on 31st of May 1966.
I hope this information proves helpful to you, However I did notice you asked elsewhere for help, with no one answering your quest, this is the site for honest answers

Andrew Hall
Archivist
The Hall & Duck Trust

[hdtrust]

Hi Angus, the best way is to get hold of some Agricultural creosote, brush it onto some timber, then lay the timber on the floors close to your concrete walls. The smell will deter most vermin to include Badgers, without hurting them.

[hdtrust]

The Royal Warrant, is not what it seems, just by selling a product or working within the Royal family will not cut it.
For a start you have to pay for it! So you could say a money spinner, but the fore’s out way the losses.
Obviously there are rules, the office which deal with it, is called the Board of the Green Cloth and has offices in Palace Street London.
Your paragraph with Greens and 1894 is interesting as the warrant for the Queen would have course been Queen Victoria and His Royal Highness The Prince of Wales would have been Prince Edward, who later would have become King Edward V11.
The Hall & Duck Trust also houses a Green’s Silens Messor which was given to Queen Victoria for her Golden Anniversary, and was used at Osborne House on the Isle of Wight.

[Author]

Posts