Forum Replies Created

Viewing 15 posts - 196 through 210 (of 270 total)
1 2 3 … 13 14 15 16 17 18
  • Author
    Posts
  • September 3, 2015 at 5:53 pm #14302
    dave
    Participant

    Hi Silverfox, I do have a RansomesMG5 handbook. If you want a
    copy of it please contact me 01376 340072 or djclark89@btinternet.com
    Engine nos may be a bit of a help in dating if they have not been
    changed. Give me a call.
    Dave.

    August 24, 2015 at 8:08 pm #14172
    dave
    Participant

    Well done Jonathan, I look forward to seeing these machines at Tractor world
    in the spring. Dave.

    August 11, 2015 at 4:55 pm #14011
    dave
    Participant

    I think that you will find that nearly all disc harrows had wood bearings, as the
    dusty soil conditions and oil or grease made for a very good grinding paste and the
    oil soaked wood was a better bearing surface than any metal to metal bearing.
    I fitted a new set of wood bearings in my set of discs about 20 years ago and they
    are still going strong today.

    August 3, 2015 at 9:35 am #13936
    dave
    Participant

    Its looking good mate. Are you bringing it to Weeley to try it out?
    Dave.

    July 26, 2015 at 8:46 pm #13901
    dave
    Participant

    Sorry I hit the wrong button the year of manufacture should read 1959.
    My mistake.
    Dave Clark.

    July 26, 2015 at 8:44 pm #13900
    dave
    Participant

    Michael,
    I will add your machine to the Ransomes register when I next update.
    Your machine was made in1950.
    Regards Dave Clark.

    July 23, 2015 at 7:39 am #13863
    dave
    Participant

    Hi Michael, I am sorry that I cannot help you with your valve setting.
    Could you please send me the machine no and engine no details for the
    Ransomes register also your contact details. Many thanks. Dave.

    July 18, 2015 at 7:20 pm #13813
    dave
    Participant

    I like your style. Good luck with the move and hope to see you and your new
    transport at Weeley. Dave.

    July 12, 2015 at 7:35 pm #13748
    dave
    Participant

    Jim, Many thanks for a great weekend . Got home ok after wadeing through 3 inches
    of standing water on the M4 in the Reading area. Look forward to next year.
    Dave.

    July 10, 2015 at 1:48 pm #13738
    dave
    Participant

    All loaded and good to go. look forward to seeing you all.

    July 6, 2015 at 7:34 pm #13723
    dave
    Participant

    Its nice to see that our cousins down under waving the V H G M C
    banner. Well done Alan.

    June 27, 2015 at 8:44 pm #13595
    dave
    Participant

    Hi Jerry your Ransomes MG40 was built in 1962.I hope that you don’t mind as I
    have added it to the Ransomes register. If you want any help please give me a
    Email and I will try to help you. Dave.

    June 26, 2015 at 11:31 am #13570
    dave
    Participant

    Hi James, I have a Ransomes MG5 handbook. If you need a copy
    please contact me and I will get it scanned in and sent to you.
    Dave.

    June 1, 2015 at 6:48 pm #13261
    dave
    Participant

    Bish The front bumper folds down to make a propstand. Phone me cos I have a service sheet for one of these machines.Dave.

    May 31, 2015 at 4:54 pm #13245
    dave
    Participant

    Hi Lars, Welcome to the world of Ransomes restorers. Please can you send me the machine No
    and the engine No for the Ransomes register that I am compiling. Good luck with the final bits.
    Regards
    Dave Clark at djclark89@btinternet.com

  • Author
    Posts
Viewing 15 posts - 196 through 210 (of 270 total)
1 2 3 … 13 14 15 16 17 18