Forum Replies Created

Viewing 15 posts - 1 through 15 (of 23 total)
1 2
  • Author
    Posts
  • April 11, 2016 at 5:25 am #20493
    hitchinsm
    Participant

    Where does it say it is a WALBRO, looks like an early Carter to me

    April 4, 2016 at 5:57 pm #20439
    hitchinsm
    Participant

    I was hoping someone would engage her in the timing of a BSA engine, offering her money if she could do it. I think its called crowdfunding 5p each would have been a laugh.

    March 31, 2016 at 6:56 am #20402
    hitchinsm
    Participant

    Me too

    February 7, 2016 at 7:13 pm #17895
    hitchinsm
    Participant

    Ignore all the sensible advice and shove a cheap and not very cheerful Honda knock off (your words) on it. First of all take out medical insurance, as you will be running at 3000 rpm plus instead of roughly 1500 rpm so you will need to run behind the machine in a vague attempt at controlling it.Please read what people have spent their time advising you on.

    August 24, 2015 at 4:54 am #14161
    hitchinsm
    Participant

    If you look around the outer edge of the flywheel you will see 1/2″ dia holes drilled in it which where used to balance the flywheel. Put a 1/2 bar in the deepest one of them and undo the nut. The strap wrenches are not very good as they spring to much. A puller is best used to pull the flywheel off, lump hammers are best avoided.

    If you need any more help ring me on 07802 199906

    August 16, 2015 at 1:23 am #14066
    hitchinsm
    Participant

    To my knowledge the phospher bronze bush has not been available for years. Is the movement you have up and down or end to end.

    July 26, 2015 at 12:25 pm #13898
    hitchinsm
    Participant

    Email me at hitchinsm@gmail.com

    July 23, 2015 at 9:17 pm #13866
    hitchinsm
    Participant

    Yes I have plenty.

    June 7, 2015 at 4:52 am #13310
    hitchinsm
    Participant

    You need a minimum 36″ stillson. If it still won’t move heat it up and off it will come.

    March 14, 2015 at 3:00 pm #12045
    hitchinsm
    Participant

    Believe it or not the original ones where made in Australia, but for whatever reason they disappeared after a few years. They are available on Ebay if you think £18.50 plus international shipping is expensive do not bother.

    February 22, 2015 at 6:40 pm #11807
    hitchinsm
    Participant

    Are you by any chance in Ireland?

    February 16, 2015 at 11:16 pm #11720
    hitchinsm
    Participant

    Yes, I have fitted hundreds. I do not waste a micro second with points and condensers.Engine starts easier, no kick backs and ignition timing is set automatically,so the engine runs a lot smoother.

    February 6, 2015 at 3:16 pm #11614
    hitchinsm
    Participant

    A somber warning, he was probably hit with something in the region of 26,000 volts. I see that level of voltage often when testing coils. Luckily my finger is on the insulated button and i lean over to press it.

    January 18, 2015 at 5:15 pm #11485
    hitchinsm
    Participant

    If you need anything for the engine, I have pretty well everything in stock.

    August 26, 2014 at 2:05 am #9807
    hitchinsm
    Participant

    Sounds like a M series, post a picture of it.

  • Author
    Posts
Viewing 15 posts - 1 through 15 (of 23 total)
1 2