Forum Replies Created
-
AuthorPosts
-
April 18, 2016 at 6:48 pm #20590
roatavator
ParticipantSorry Charlie, I’ve now had a better look, its 6239.
Apparently it hasn’t been run for more than 20 years, the machine belonged to the grandfather of the late husband of the lady I bought it off, and has been in storage since, but it has compression and appears fully complete so hopefully its fixable!April 3, 2016 at 7:57 pm #20437roatavator
ParticipantMe too, seems like she was keen to spread her favours……
April 1, 2016 at 8:04 pm #20409roatavator
ParticipantExcellent videos, thanks for posting. Must remember camera/video next time……
March 30, 2016 at 5:57 pm #20392roatavator
ParticipantSorry no photos from me,I forgot the camera!
March 20, 2016 at 5:54 pm #20312roatavator
ParticipantJust back from a great day out, this is developing into a really large event, great range of all types of machines. Nice to be able to say hello to lots of members of the VHGMC, we really are a friendly bunch, just how a club like this should be. Thanks to all involved in organising, I’ll certainly be a regular from now on.
PS does anyone know what the V4 engine was in the Ransomes MG? Not an original option, unless I’m very much mistaken and with straight through pipes it was making too much noise to ask! (I know, fine talk from a bloke with 2 SIMARS at the event!)March 12, 2016 at 8:34 pm #20230roatavator
ParticipantHi Robert.
From looking on the net it seems the SC12 is basically a modernised Mk12. I have a very old Villiers manual for the Mk12 series which you are very welcome to have, its a bit tatty but readable. I think from what I have read that your SC12 might have electronic ignition, so I don’t know if it will help you. Are you going to Stanfield next Sunday? If so I can bring it for you.
Peter
March 11, 2016 at 8:48 pm #20225roatavator
ParticipantFingers crossed for dry weather from now until the day! Can’t wait to get the machines well warmed up with a bit of work!
February 13, 2016 at 8:36 am #19230roatavator
ParticipantI can only add my thanks and congratulations. What a wonderful resource, thanks Alan!
February 9, 2016 at 9:00 pm #18749roatavator
ParticipantJust got my entry in. Should be bringing selection of SIMARs so if you’re coming, bring your earplugs!
Couldn’t get there last year, really looking forward to this one!
February 2, 2016 at 8:05 pm #17301roatavator
ParticipantLooks like Issue 29 is already out Charlie. I read it second hand from my good lady, so that would tally. The one I referred to is definitely issue 28, has photo of Hedera Helix on the front and heading “Frost and follies in N. Yorkshire”. Possibly some newsagents will still have 28.
February 2, 2016 at 8:51 am #17283roatavator
ParticipantMy late father and mother used to dig around 5 acres by hand every winter when they worked for a market gardener. Effectively it was the only work for them to do during the winter, and there was no hurry, so they just paced themselves. As soon as the boss died father took the market garden over, bought the Honda F80 with a plough and never dug the land again!
I like Monty Don a lot, and I understand his message about using hand tools, but there are some jobs for which most of us are either too unfit or too time poor to do by hand. Anyway, some of us love the sound of a SIMAR and some don’t, I guess!
February 1, 2016 at 5:20 pm #17198roatavator
ParticipantNow, Aspera, that takes me back. If I remember right my late father had a total of 3 200’s over the years. By far the shortest lived was the Aspera engined one which only did a few seasons. Replaced with a Honda engine which went on forever….
February 1, 2016 at 9:26 am #16939roatavator
ParticipantNice one Charlie
What sort of date? Must be a late one, 1970’s?
January 23, 2016 at 9:35 am #15833roatavator
ParticipantGood luck with the restoration! If she’s got compression then getting her running shouldn’t be too difficult (hopefully!). Look forward to more posts!
January 22, 2016 at 6:32 pm #15831roatavator
ParticipantWell done Bish! Great to know another one is to be preserved. Is it a runner? Do you intend restoration or keeping her in her working clothes?
-
AuthorPosts