Reply To: Ransomes MG valve clearances

Home › Forums › The Machinery Forums › Ride-on machines › Ransomes MG valve clearances › Reply To: Ransomes MG valve clearances

August 10, 2016 at 3:13 pm #21879
ransomes256
Participant

The valve clearances should be 0.006″ inlet and 0.008″ exhaust
Gap set with piston at top of stroke on compression and checked under the cover plate on the side of the barrel. Tappet bolt and locknut screwed into the tappets.
Cylinder bolt head torque 32 lb/ft
Neil