Ive cleaned the spindle holders, a Mate let me have some Pro rust to try , it got the loose bits of. When cleaning I noticed the worst damage was the sides subject to the full force of the grass being thrown at them, the other sides being sheltered not to bad. See photos 1 and 2, with this in mind it would have been an idea to turn them around a few years back. Coated 2 and 3 holders with etch primmer and will over paint with hammerite. No 1 will get a smearing of grease, end of this season I will see whats going on under their. I recon this being a side discharge No 1 holder wouldn’t get the blast but 2 and 3 on the one side would get the waxoyl I used blasted off with grass.
Want to see if our membership is for you?
