B&S Powered pumpset.

Home › Forums › The Main Forum Area › Projects › B&S Powered pumpset.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • March 15, 2014 at 2:39 pm #6429
    sidevalve44
    Participant

    Not really a piece of garden machinery but has potential ! Bought this old (1960) pump-set this morning from a member in neighbouring Oxfordshire.
    The engine is a Briggs and Stratton model 80331 and is, I guess, about 1.5HP.
    If anyone has any information or literature on this pump-set I would appreciate it.

    Attachments:
    March 15, 2014 at 5:29 pm #6432
    wristpin
    Participant

    Nice little pump. If you google Pegson there are plenty of hits. Knew that they made big stuff, mucky pumps, rammers and big tracked crushing plant but was unaware that they also made small stuff. Don’t start it up and run the pump dry, may damage the seals.

    March 16, 2014 at 4:45 pm #6488
    sidevalve44
    Participant

    Thanks for the advice Angus. Luckily, the engine is a non runner (no spark) but, will bear this in mind when I do get it going. I have looked up Pegson, and there is, as you say, a lot of hits. Nothing on mine though.

    March 16, 2014 at 9:54 pm #6511
    stuart
    Participant

    The engine is 3hp.I have a complete NOS 3hp engine for a water pump which has the same small “Flo-Jet” carburettor as yours.The crankshaft has an external thread for the water pumps impeller to be screwed on.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.