Ransome Ajax

Home › Forums › Groundcare Machinery › Grass Cutting Machinery › Ransome Ajax

Tagged: 

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • March 2, 2022 at 6:38 pm #38624
    davidt
    Participant

    Newcomer to restoration and this website.

    Stripped down an ajax 4 .. Ransome , but after removing landrollers and ‘clickers’ , cannot split rollers. I am thinking to tap rod out but doesnt budge.

    Also, is the pin in the side, after removing large sprocket meant to be straight but tight ? Mines bent and took some shifting.
    Thirdly , how do I remove the square fittings off both ends of the cylinder blade
    I know photos would help but I just cant do it, even after reading very detailed instructions.
    I am hoping, if you have restored one, you’ll know what I’m asking.

    Thankyou all

    March 3, 2022 at 11:19 am #38625
    wristpin
    Participant

    The blocks are the bearing carriers and can be levered off with a couple of pry bars or tyre levers. Take care as they are made of a relatively soft alloy. The carriers may come off leaving the bearings behind, which can then either be levered off or pulled off with a two or three leg puller.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.