So the plan is to buy a 5/8″ x 1″ x 1″ bearing and turn it down to 15/16. The second bearing won’t need turning down so I will get a 5/8″ x 7/8″ x 5/8″.
Hi Keith and welcome to the club.
Don’t worry about the size of you collection, it’s the size and depth of you enthusiasm about the machine’s that matters.
Hi All, Further to my recent attempts at getting a photo through the ether, I am trying again.
Thanks to Charlie and Angus for all your help.
Here goes. Think this is an Atco 20 HD sidewheel motormower circa 1960. Any advance??
Timberjack
Hi John ad thanks for the welcome.
Just finding my way around the site and must say it is the most interesting that I have come across. I shall be subscribing without doubt.
Will be uploading photo’s of my meagre collection soon.
Best Wishes,
Keith
Looking at the photos it either a Mk 10 or 12 Villiers. If you measure the bore it will confirm. The carb is a b10 I’m guessing originally it would of had a type v carb. Do you have an air shroud, if not I may have one in my store that will fit.