[mickattwo]

Thanks Alan I have sent email and a notification on here

[mickattwo]

Where do the bolts fit?
I have a Mk 1 gearbox and a roto-box
The gearbox is very heavy and is going to the scrap man
Free for collection Sheffield

[mickattwo]

There is no oil alert switch on the engine so will fit a new coil
Needs a good clean before doing anything
Thanks Stuart

[mickattwo]

Hi I have a Gravely convertable 7.6 electric start 2 wheel tractor, not entirely vintage but not too many in the UK
I have made toolbar fittings for front or rear cultivation but have not used the m/c to do any work yet
It is automatic so very easy to use and zero turn also.
I have a friend who buys and sells Gravely mowers and he is very knowledgeable of the engines and transmissions.
I have never seen any Graveley,s on show anywhere

[mickattwo]

I have a Mk 1 gearbox that you can have for a nominal price
PM me and I live on the Sheffield/Chesterfirield border

[mickattwo]

Exellent pictures Alan very good of you to spend valuable time to pass this gallery on to members who could not attend. Good weather as well
A big thanks

[mickattwo]

I have found the flywheel cowling and the numbers are

06311HSB40/41212
6138787

Hope this might date the engine

[mickattwo]

I have a parts list ( No1532) 2/6d with no dates at all but it is for the barford “Atom” tractor and implements.
All the implements implied to and the tractor is for the single wheel machine with land wheel and grass drum
The last page shows how to convert to two wheels
I have some of the implements described

[mickattwo]

I from all the picst looks like a F30 , them/c I have has a non standard engine(a Honda copy) which starts easily but has the stationary engine lever plate and someone has connected a throttle cable to the plate which has 2 positions for the cable connection (the cable is solid not multi stranded) and does not alter the engine speed much. the cable may not be standard
I will take pictures when I can get to allotment this weekend for all to see.
Thanks for all the replies

[mickattwo]

Yes looks very useful, have seen a similar one about 30yrs ago but only 3ft wide doing the footings for 2 large houses, not as heavy duty as the one pictured, the builder said he hired it because there was not an entrance wide enough for a JCB as planning for the gate area had not been submitted, did the job and he took it home every night

[mickattwo]

Thanks Stuart, that is a surprise. I may be able to get the carb as it is misplaced by previous owner.
I would like to get this m/c up and running but need the tyres for an Auto Culto Junior Mk 3 that I am sorting. Thanks again

[mickattwo]

Some good and interesting clips to watch on Pathe News, I spent an hour or so last night and enjoyed all of them

[mickattwo]

Hopefully here are the other pics

Attachments:

1. 

[mickattwo]

The m/c is not Atco but Ransomes 24. Here are the pics of the engine (F15 Villiers)? Is it difficult to remove cutter for re-grinding as it is in a bit of a state?

Attachments:

1. 

[mickattwo]

I have reported this email to fraud squad today, this is asking for bank details

[Author]

Posts