coil fitting honda gx 120

Home Forums General Help and information coil fitting honda gx 120

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #27065
    mickattwo
    Participant

    I would like to know the airgap needed when fitting an electronic coil on a GX 120 Honda Engine
    The engine just cutout and have checked all connoctions and all seem OK so assume it is the coil
    Any other reasons for the sudden cutout which happened as far away from the shed as possible with spadelug wheels on, what a job to get the m/c under cover

    #27068
    stuart
    Participant

    If the engine has an oil alert / low oil sensor then check your oil level as if allowed to get too low it will do its job and cut the ignition out saving you an expensive repair !.
    As for the air gap one of those small paper / card labels (you know the ones with a string attached) will be ok.

    #27073
    mickattwo
    Participant

    There is no oil alert switch on the engine so will fit a new coil
    Needs a good clean before doing anything
    Thanks Stuart

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.