Forum Replies Created

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #42387
    burls
    Participant

    Cleaned the carby best I could but still think it is the fault. I cant get it to idle and the governor keep hunting. Any thoughts on where or what carby replacement I can get/use?

    #41783
    burls
    Participant

    Carby is in soaking now, lve managed to get it all apart except for the tiny brass screw in the base next to the main jet standoff. All is very tight so hope no leakages. The needle was stuck in the seat, l got it out and hope it cleans up and seals. I looked around for kits but no success.
    The carby housing has number SC16 838E.5/50 stamped on it

    #41781
    burls
    Participant

    Update, l have spark

    There was no continuity between points so gave them a good talking to and fixed that, set the points gap to 0.016” and now l have spark. Next is to clean the carby (it’s a mess)

    #41772
    burls
    Participant

    Gidday mate, thanks for your input

    Reg’d No DW 02348

    Makes sense its a charge coil, l thought it must have been a trigger coil. With this new info, l will check points work correctly. I do suspect the spark coil has failed though.

    Photo of coil plate for review

    Attachments:
Viewing 4 posts - 1 through 4 (of 4 total)