Tarpen type 42

Home Forums The Machinery Forums Garden implements Tarpen type 42

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #6325
    vhgmcbuddy
    Member

    hi all

    Just starting my 3rd rebuild, This time its a Tarpen type 42 (the one with the 2 side panels with the tank above it, with switch, 2 sockets and a gauge)

    It was a non starter spark and fuel wasn’t the issue, I have found the crankcase gasket had rotted away

    Lucky I striped it as the oil ways into the bearings where slugged up as was the crank case, The conrod was unusually stiff so I degreased and cleaned the big end has 2mm of movement (up/down) now so I need to get that sorted

    Does anyone know of a parts list / manual for this Tarpen is available online to download ?, I also need a spares supplier ?? – I have read that the engine may be a Villiers / Villiers design if so what model is it ??

    Thanks

    while im waiting for parts, I will media blast the tank and tin work and get some fresh paint on it 1-2 of etch with 3 of top coat

    #6349
    charlie
    Keymaster

    Photo of engine might help with id.

    #6351
    vhgmcbuddy
    Member

    here you go, I still had them on the camera last night, it has the wipac mag and amal carb

    Attachments:
    #6409
    charlie
    Keymaster

    Engine certainly has a JAP/Villiers look but not sure which or what model.

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.