Help with 2 stroke ignition problem

Home › Forums › General › Help and information › Help with 2 stroke ignition problem

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • August 23, 2014 at 8:56 am #9786
    vhgmcbuddy
    Member

    I have no spark on a Zenoah two-stroke. The resistance on the coil is 6.5 Ohms on the 20k setting which could indicate it’s working correctly although I don’t have a manual. I think the item in the photo below is a condenser, but I’m not sure. Should it be open circuit to earth?

    Zenoah condenser

    As there is no facility my review my post, I hope this comes out ok. It’s not a brilliant photo. Also, I know it’s not a vintage machine, but it might be one day if I can get it going!

    August 23, 2014 at 8:58 am #9787
    vhgmcbuddy
    Member

    First time I’ve used this new forum and I’m baffled. Where is the original posting?

    August 25, 2014 at 8:34 am #9794
    andyfrost
    Participant

    Coils can’t be “PROPERLY” tested using a multimeter , have it tested on a professional ignition tester , your local small engine centre or mower repair shop should have one.

    Andy.

    August 26, 2014 at 3:52 pm #9808
    charlie
    Keymaster

    Links to photobucket can be problematic, better to post photo on forum.

    March 9, 2015 at 3:09 pm #11993
    charlie
    Keymaster

    spam removed

    April 3, 2015 at 8:46 am #12382
    charlie
    Keymaster

    spam removed

    April 8, 2015 at 1:31 pm #12493
    charlie
    Keymaster

    spam and tags removed

    November 20, 2015 at 8:47 am #15247
    trusty220
    Keymaster

    More tags removed. Go away!

    November 20, 2015 at 2:31 pm #15249
    charlie
    Keymaster

    Topic closed

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
  • The topic ‘Help with 2 stroke ignition problem’ is closed to new replies.