Forum Replies Created

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • September 12, 2021 at 10:37 am #37857
    properjob
    Participant

    Hi, thanks for the info…..not sure what best to do with it as I am trying to make space 😃
    Thanks again

    August 31, 2020 at 8:57 am #35345
    properjob
    Participant

    Yes , if I remember correctly, the guy I bought it off had a mg2, so that would make sense.
    I’m hoping Dave knows of someone that can send some photos and measurements so I can put it back correctly, rather than do my own thing.
    If anyone can help it would be appreciated, many thanks

    February 18, 2018 at 1:40 pm #27968
    properjob
    Participant

    I’m a bit further forward, when you pull the lever forward, he lift mechanism locks in, partially lifting, and push the lever back a little, seems to lift fully locking on a pin.
    Strangely I can only make it drop by rotating the wheels backwards, I’m sure this is not right or practical. Is the another spring or linkage to release it to drop?
    Many thanks

    Attachments:
    February 17, 2018 at 10:02 am #27943
    properjob
    Participant

    I think I’ve got things something like it but I’ve has to make /extend the shaft which possibly was located by a roll pin? I would need to know approx position as this part of the shaft was broken. There was also a spacer (that looks like threads), should this be there or further out as the bolt head rubs the casting, but this may be due to linkage not all fitted. If you wish to phone to explain or email me yours, mobile is 07747783881.
    More pics may be helpful😃
    Kind regards

    Attachments:
    January 21, 2018 at 7:07 pm #27731
    properjob
    Participant

    No great rush, I have the same space issue and my health isn’t favourable at the moment along with the wife earache 😄😂😂. Thanks again

    January 20, 2018 at 9:30 pm #27716
    properjob
    Participant

    This is a great help.When you get chance the main frame will also be helpful as all I have is a pile of loose parts 😄
    Thanks again

    January 19, 2018 at 10:53 pm #27667
    properjob
    Participant

    That would be great….I was beginning to think what I had was rarer than I thought 😀😀
    If it’s easier, can you email i.dennis456@btinternet.com
    Many thanks

    December 13, 2017 at 8:46 pm #27416
    properjob
    Participant

    Thanks everyone, I tried Jon, eventually spoke to a lovely lady who said I had the wrong number, the correct number is 91323 842477. I’ve tried this several times with no reply, and the website seems to be down this morning.
    Good idea about resoldering the bracket on another condenser, this will be my next option I think, but external could also be achieved 👍👍

    December 11, 2017 at 9:43 pm #27394
    properjob
    Participant

    That’s great, I will give them a call, many thanks

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)