Sorry it won’t let me upload the photos for some reason
Hi, I’ve found someone to turn a new set of handle grips from a nice piece of hardwood. I would be interested to know whether you think I should stick to the original design ( as below) or go for something a little more elaborate
Thanks for your reply. Very interesting
Hi thanks for your answer that’s great. Do you know when the model name changed from “Lightweight” to “Minor”
I have found the ID plate which was covered in paint can anyone please date it from this:
This is what it looks like but seem very loose
Valves are both closed on tdc
I haven’t had the engine apart and it ran before the spark problem. It’s a mystery
And “movement”. Bloody predictive text!
That should read ” feeler “
Checked the valves with a deeper and there is hardly any move many on the piston. I think I will check compression for peace of mind
Ok thanks
Hi the wire from the coil to the points isn’t long enough. Do have to use a specific wire or can I use a strand from normal three core cable?
I think I am going to change the condenser it was the only part of the ignition I didn’t change during the rebuild.
Remember Me
Got a machine and need info or have a question? Then a post in the VHGMC forums is a great place to start!