[hanysmiglanc]

does anybody know what is the fuel consumption of the kubota z600 ones

[hanysmiglanc]

You are too scared it’s a lot more capable than you think

[hanysmiglanc]

hi i’m ordering the paste and could someone tell me how much paste i’m going to need to sharpen all 3 cylinders?

[hanysmiglanc]

Thanks! That’s probably it. The problem Is It’s almost impossible to get these new in normal price at least in my country. This would cost more than I paid for the whole tractor!

[hanysmiglanc]

Could you tell me how to reduce the forward speed? Is it just riding slower or will this require to adjust the belts?

[hanysmiglanc]

I can aquire some paste from internet but it’s pretty expensive and that’s why I asked can you do lapping without paste.

[hanysmiglanc]

I can’t increase the cutting speed but i can’t cut any paper with that even after adjusting. This happens on all cylinders. And can you do backlapping without paste?

[hanysmiglanc]

My machine is Ransomes Motor Triple MK4M with kubota z600-b engine. It has 4 blade gang. Here’s the photos

Attachments:

1. 
2. 
3. 
4. 
5. 
6. 

[hanysmiglanc]

Topic closed I did everything like I said in previous post and now the brakes work.

[hanysmiglanc]

Thanks for the resopnse. The calipers on the right side were seized so I took them off and fixed them and regulated the clerance and everything works fine except the pedal still falls in the floor and braking force is very weak. Do you have any idea how could I fix this without changing brakepads? mine idea is to shorten the bar that goes from the pedal to that thing that connects to rods from brakes an make the bars that go to the brake calipers longer by unscrewing the connectors a little. What do you think about that will it work properly?

[Author]

Posts