Ransomes mg6 with bertolini plough

Home Forums The Machinery Forums Ride-on machines Ransomes mg6 with bertolini plough

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #4888
    vhgmcbuddy
    Member

    Here’s a picture of my mg6 ploughing.
    The plough bolted straight on the rear frame, so on it went for the afternoon.
    The plough was a bit small, but it worked better than a spade.
    I think a ts42 is called for when I can drop on one. Then out to a few matches.

    Attachments:
    #4903
    vhgmcbuddy
    Member

    your right there the spade is classed as a swe r word here. but its nice to see one at work. would it pull a trailer plough,and if so how many furrows ? just off topic here when you uploaded the photos what setting size do you use as my photos come out very small.

    #4904
    charlie
    Keymaster

    There was a 2 furrow plough for the MG crawler I think.

    #4913
    vhgmcbuddy
    Member

    I do struggle a bit with uploading photos John. I’ve tried uploading them on the computer but i get a message saying they’re too big, so i put them on with my phone.

    Any tips would be good.

    I’ve heard about the 2 furrow plough too. Do you know if they are a full size mould board Charlie? Is it as simple as 2 ts42 bodies fitted together?

    #4914
    vhgmcbuddy
    Member

    I thought I should add a photo of the finished plot.
    So here goes. First time ploughing with this machine.

    Attachments:
    #4917
    vhgmcbuddy
    Member

    champion job that,when the frosts get to it, come spring it will cultivate easily.

Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.