can't post to forum with photos

Home › Forums › General › Help and information › can't post to forum with photos

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • January 26, 2014 at 8:27 pm #5497
    vhgmcbuddy
    Member

    tried 4 times today to post to Forum. All failed only succeeded if I didn’t included photos.
    [photos are all less than 3mb each] Is this a temporary glitch?

    Steve Douch

    January 27, 2014 at 3:28 pm #5505
    charlie
    Keymaster

    If the photo of an Atterton cylinder grinder appears then it is working.

    Attachments:
    January 27, 2014 at 3:30 pm #5507
    charlie
    Keymaster

    Yep seems to be working for me, could have been a temporary problem. Let me know if you still have difficulty posting photos.

    January 27, 2014 at 9:07 pm #5513
    hillsider
    Participant

    I posted two photos yesterday with no problem in another section of the forum and here is something just a little different.
    Ray.

    Attachments:
    January 27, 2014 at 11:27 pm #5518
    wristpin
    Participant

    Not to be left out!

    Attachments:
    February 7, 2014 at 10:24 pm #5760
    vhgmcbuddy
    Member

    It appears to be a problem at my end which has suddenly cropped up. I only appear to be able to upload single photos less than about 1mb!

    February 9, 2014 at 2:06 pm #5782
    charlie
    Keymaster

    If look at the box above where it says ‘choose file’ you will Maximum file size allowed is 3072Kb.

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.