Reply To: Colwood TypeA User/Workshop Manual

[sidevalve5]

Dear Roy,

I have the same machine in original condition that I still use for row cropping. I do not have a manual, but can take some photos of any individual parts of the machine that you are unsure of, if this helps. Think you will find the engine is a JAP 2a, not 1a.

Find the Colwood a joy to use, much easier than a Planet type push hoe that would be the usual alternative. You can go very slow in 1st gear if you want to be very accurate and get close to the crop. Or nip along in 2nd. The clutch on mine sticks after it has been left for a few months, but rocking it back and forth soon free’s it. Had always assumed the steel wheel was fitted as standard on the eariler models and the rubber tyres to the later ones. There are many experts in the club with access to documentation that could clear up this point for you.

Best wishes,

Grahame