Reply To: Ransomes Motor Triple Mk4 Clutch

[smithyb]

Hi Folks,

thankfully other then normal maintenance, I have had no problems with my Motor Triple for the last 2 years.

Now I have an issue which I am struggling to figure out. Any advice would be appreciated.

When cutting, it keeps throwing the vee belt off for the rear (middle cylinder) I replaced the vee belt as it was cracked and worn.

With the new belt on I thought I would be sorted but unfortunalely not. It is still throwing the belt off.

If the machine is stationary and I engage the cylinders, all three will spin fine but once I start driving, the belt will come off within 100 meters.

Any ideas?

Thanks in advance.