Winget tractor restoration advice - Vintage Horticultural and Garden Machinery Club

This topic has 1 reply, 2 voices, and was last updated 9 years, 5 months ago by franktonpaget.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
September 25, 2016 at 5:54 pm #22517

vhgmcbuddy
Member

Hi

I have a Winget 550 Type BA13108BS10 with Petter diesel engine and a hydrostatic drive. The drive is broken beyond repair.

Would like to convert to a standard manual tractor.

Need to buy back axle, gear box and if possible a Lister engine.

Can anybody help please with advice so I can buy the right parts ie: rear axle, gearbox and Lister engine that will all bolt together and work 🙂

Cheers
Dave

September 26, 2016 at 5:07 pm #22525

franktonpaget
Participant

The person you need to contact is Dick Bentley the Club Helpline expert on Winget and MSW tractors.

Contact details are in the Cultivator

Are you sure it is a Winget rather than a MSW ?
I understood that Wingets had Lister SR1 engines and a Newage gearbox while the MSW developed from the Winget had Petter or Hatz diesels or Kohler or Wisconsin petrol engines with Marshallmatic Peerless Hydrostatic drive in the lighter model or a Lister ST1 diesel with Sunstrand hydrostatic in the heavy duty model.The Newage 3 speed gearbox was also available as a option on the MSW.
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.

Winget tractor restoration advice - Vintage Horticultural and Garden Machinery Club

Winget tractor restoration advice