Wheel Horse Drive Pully

Home › Forums › The Machinery Forums › Ride-on machines › Wheel Horse Drive Pully

Tagged: 

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • April 11, 2015 at 9:38 pm #12553
    vhgmcbuddy
    Member

    Hi

    Is the drive Pully on a Wheelhorse Command 800 supposed to be ‘floating’?

    See pictures, Pully moves about freely on shaft.

    Graeme

    Attachments:
    April 11, 2015 at 9:52 pm #12558
    wristpin
    Participant

    Seem to remember that there’s a grub screw in the reverse side of the pulley hub – so no, it shouldn’t float!

    April 12, 2015 at 5:50 am #12560
    vhgmcbuddy
    Member

    Wristpin is right. If you look up Toro master parts viewer, Model No 1-0130 you can see the pulley.

    April 12, 2015 at 9:16 pm #12570
    vhgmcbuddy
    Member

    Hi Guys

    Thanks. This little tractor pulls boats around for a living, so I will go to yard next Sunday and fix it, thanks again.

    Graeme

    April 19, 2015 at 10:52 pm #12646
    vhgmcbuddy
    Member

    All fixed…while up doing safety boat duty I took my tools…..some days are Luckier than others..I found the grub screw hole actually through the Pully V where the belly runs, took a small Allen key to see if anything was in the hole….it located, was right size, one nip and all sorted….

    ….how many times have we fiddled and struggled, well today was payback, two mins and all fixed….thanks guys…

    Attachments:
  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.