Walbro carb onClinton 498

Home › Forums › The Main Forum Area › General talk and discussion › Walbro carb onClinton 498

Viewing 4 posts - 16 through 19 (of 19 total)
1 2
  • Author
    Posts
  • May 23, 2016 at 5:41 pm #20956
    vhgmcbuddy
    Member

    Hi Charlie,

    I think you may have misunderstood what I was trying to explain, so have found another photo from the article and indicated what I believe is the fuel entry point. There is no sign of this on your photo number P1040986 in your first post, so it is probably bunged up with crud.

    Sean

    Attachments:
    May 24, 2016 at 8:17 am #20960
    charlie
    Keymaster

    Sean, thanks for clarification. I will have a good look at my carb and see if that hole exist, possibly corroded up.

    May 25, 2016 at 7:47 am #20962
    charlie
    Keymaster

    Thanks to Sean for pointing me in the right direction. I had a good poke around with a small screwdriver and found the hole shown in the last photo. It was completely filled with hard corrosion caused by float chamber having water in it some time in the past during storage.

    May 28, 2016 at 8:38 am #20986
    charlie
    Keymaster

    Good news, carb now refitted to engine and it starts and runs, success.

  • Author
    Posts
Viewing 4 posts - 16 through 19 (of 19 total)
1 2
  • You must be logged in to reply to this topic.