Pauls Commando 8 Resto

Home Forums The Main Forum Area Projects Pauls Commando 8 Resto

Viewing 15 posts - 1 through 15 (of 99 total)
  • Author
    Posts
  • #1357
    vhgmcbuddy
    Member

    As youve seen on the old forum paul has dropped his commando 8 down to me for a little tlc.
    ive made a start on it and will upload photos and progress report tomorrow

    #1358
    vhgmcbuddy
    Member

    as youve seen on the old forum paul has dropped his commando 8 down to me for a little tlc.
    ive made a start and will load photos and progress reports as and when (watch this space)

    #1389
    vhgmcbuddy
    Member

    Thank you Mr Showman, I’m looking forward to seeing old faithful looking a bit smarter !!

    #1435
    vhgmcbuddy
    Member

    commando as it arrived, after a while i had it all in bits.
    most of the parts to go to the shot blasters

    Attachments:
    #1440
    trustymasseyman
    Participant

    O dear Paul I just hope Chris as the instructions to rebuild 🙂

    #1441
    vhgmcbuddy
    Member

    was just thinking chris I bet you could take one of these to pieces with a blindfold on.am I close ?

    #1454
    vhgmcbuddy
    Member

    I hope Chris can remember how it goes back together !!

    #1455
    vhgmcbuddy
    Member

    I havnt got a scooby doo, its all bluff, i use to be a postman

    #1461
    vhgmcbuddy
    Member

    That figures, postmen like the colour red as well don’t they ??

    #1462
    vhgmcbuddy
    Member

    we have a lot of trouble with our postman,he drops our mail at anybodys house in the street except ours I hope chris delivers to your house instead of steve d

    #1468
    vhgmcbuddy
    Member

    i got the sack for dropping rubber bands, now i hold the orse’s together with them as they are colour coded

    #1511
    vhgmcbuddy
    Member

    Well the brake spring is on its way from Hugh Page… somewhen…

    #1545
    vhgmcbuddy
    Member

    ive picked up the parts from the shot blasters and dropped off the wheels.
    spent saturday afternoon and today sanding down the parts ready for primer, most of the afternoon was spent on the gearbox as it has to all be done by hand.

    #1551
    vhgmcbuddy
    Member

    Thanks Chris, you’re a star !! (applause)

    #1634
    vhgmcbuddy
    Member

    another day in the shed. all the parts are now clean and rubbed down hopfully get some primer on them today.
    steve d popped in for tea this afternoon, but didnt hold things up much.
    just the engine to do tomorrow. might have some red bits by midweek

Viewing 15 posts - 1 through 15 (of 99 total)
  • You must be logged in to reply to this topic.