Reply To: JAP 2a flywheel removal

[andyfrost]

Grahame , the starter pulley(the alloy part) and the steel inner(with the slot) are as such one unit , and upon undoing will come off as a complete unit , it’s then a simple task of drawing the flywheel off its staight shaft , in my experience they are very easy to remove.
Very recently I did a 2A on a Bulldog for a collector friend of mine , fortunately the mechanicals were excellant , the coil was duff , and as he wanted 100% reliability , I fitted a complete new ignition system , all parts are easily available , it started and ran superbly , and he’s delighted with it.

Andy.