Villiers 25 governor setting

Home › Forums › The Machinery Forums › Pedestrian operated machines › Villiers 25 governor setting

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • November 19, 2020 at 4:14 pm #35917
    donald
    Participant

    I am restoring, to working order, a Hayter 26 with a Villiers 25 engine and a Zenith 24t carburettor. The engine has a governor with the operating shaft protruding from the engine block and connected to the throttle butterfly via a link. The hand throttle only applies spring tension to one end of the governor rod. Can anybody advise me on setting up the external linkage from scratch?

    Many thanks for any assistance, Donald.

    November 20, 2020 at 5:25 pm #35938
    vhgmcbuddy
    Member

    I think you can download a Villiers workshop manual to see the set up for the Governer, if not, let me know and I will copy the page from mine. Plonker

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.